Fome Flex 120 Seconds

FOME FLEX 120 SECONDS is a high-performance, fast-grip adhesive foam designed for quick and secure bonding of insulation materials and a wide range of finishing, construction, and renovation applications. It features no secondary expansion, ensuring precise application and reliable results.

Key Features:

• Extremely fast initial grip — bonding starts in just 2 minutes

• Minimal support required — typically only 1 minute, depending on the weight of the material

• Cutting time: 10 minutes | Full cure: 2 hours

• High yield — up to 80 linear meters at a 3 cm bead width or approx. 12 m² of surface coverage

• Environmentally friendly — certified under M1 Emission Classification for low emissions and safety

Applications:

Ideal for:

• Installing insulation and finishing panels (EPS, XPS, PIR, PF)

• Block masonry and step installation

• Mounting decorative elements, plinths, and window sills

• Bonding materials like concrete, wood, brick, ceramic tiles, stone, metal, OSB, gypsum, and aluminum

FOME FLEX 120 SECONDS significantly improves work speed and efficiency, making it an excellent alternative to traditional adhesives and dry mixes. It reduces material handling and transport costs while ensuring strong, lasting bonds.

• Preparation:

  • Shake the can vigorously before use.

  • Clean and moisten the application surface thoroughly. Moistening helps accelerate foam curing.

  • Attach the foam can to the gun by screwing it in tightly. Turn the can upside down for application.

• Adjusting Foam Flow:

  • Use the adjustment valve located on the back of the gun handle to control the foam output.

• Application:

  • Hold the nozzle 2–3 cm from the surface of the polystyrene board.

  • Apply the foam in an "M" pattern across the board.

  • Wait approximately 2 minutes before pressing the board firmly onto the surface.

  • Provide support for up to 1 minute, depending on the size and weight of the board.

• Coverage & Timing:

  • For large insulation panels, ensure that at least 10% of the surface is covered with foam.

  • Correction time is up to 8 minutes after application.

  • The adhesive achieves full mechanical strength in just 2 hours, after which construction can continue.

• Working Conditions:

  • Application temperature: -10 °C to +35 °C.

  • If using the foam in low temperatures, warm the can to approximately +18 °C by placing it in a warm room or in warm water (do not overheat).

• Cleaning:

  • Remove uncured foam using FOME FLEX Foam Cleaner.

  • Cured foam can be removed manually or with FOME FLEX Hardened Foam Remover.

Store upright in a cool, dry place. (+ 5°C to + 25°C)

18 months shelf life from the date of manufacture when stored in accordance with instructions

Protect canisters from direct sunlight and heat above 50 °C

Box quantity – 12 tubes per box