FOME FLEX HYDROPROTECT FLEX PRO tape, 12 cm x 25 m
(€48.77 Ex. VAT)
The elastic waterproofing tape with grid is intended for additional reinforcement in places where deformational cracking is possible, as well as in floor, wall and ceiling joints, internal and external corners, and pipe transitions.
- Indoor & Outdoor
- Elastic
- With grid
Description
Flex Pro Tape is resistant to hydrostatic pressure according to DIN 16726 and permeable to water vapor in accordance with DIN prEN 1062-2. It is used together with the waterproofing membrane FOME FLEX HYDROPROTECT. The waterproofing tape is immersed in the first layer of the waterproofing membrane and covered with the second. Sealing tape is tearproof, durable and resistant to many chemicals as well as to frost and UV radiation.
This tape is intended for additional reinforcement in places where deformational cracking is possible. Also, it can be used in floor, wall and ceiling joints, internal and external corners and pipe transitions. Suitable for use together with a waterproofing membrane FOME FLEX HYDROPROTECT.
Usage Instructions
Preparation: The surface should be clean, smooth, dry, free of grease, mechanical damage and other particles that reduce adhesion. Application: The product is ready to use. Prime the surface. Wait until it dries. Then apply the first layer of FOME FLEX HYDROPROTECT waterproofing membrane on the surface. Cut an appropriate length of FOME FLEX HYDROPROTECT FLEX PRO TAPE and dip it into the first layer of applied membrane. Press firmly against the surface so that there are no wrinkles and the membrane is fully absorbed into the tape. Apply a second layer of membrane over the submerged tape to completely cover the tape. Apply the membrane to the tape with a roller, brush or trowel.
Logistical Information
The product is packed in 10 and 25 m long rolls. Store in a dry, cool and closed space. Quantity per box – 4 pcs. Quantity per pallet- 320 pcs.
Technical Specification
Index Units Certification Value Width of the tape mm 120 Widht sealing zone mm 70 Width sealing zone mm 20 Expansion lengthwise without layer at Fzmax % 387 Expansion lengthwise with layer at Fzmax % 47,7 Expansion crosswise at Fzmax and expansion zone horizontal centrically % 205 Breaking force lengthwise without layer at 23 °C N/15 mm 55,7 Breaking force crosswise without layer at 23 °C N/15 mm 57,8 Breaking force crosswise and expansion zone horizontal centrically N/15 mm 24 Split pressure test bar/24 h** DIN 16 726 / 5.11: tight at 1,5 Ozone resistance DIN 53 509 patterns of crack 0 fulfilled Water vapour diffusion – equivalent air layer m 2,7 Water vapour transmission g/m2 DIN prEN 1062-2 7,8