top of page
Point 007 Prime&Bond spray adhesive

Point 007 Prime&Bond spray adhesive

€16.99Price
(€13.81 Ex. VAT)
A multipurpose spray adhesive and primer. 
  • For indoor and outdoor use
  • Use for priming between -5 °C and +35 °C
  • Use for bonding between 0 °C and +35 °C
  • Multipurpose adhesive
  • Long open time – 60 minutes
Quantity

  • Description

    A multipurpose spray adhesive and primer. Can be used indoors and outdoors for a wide range of applications such as: priming surface before using window or other tapes, also bonding foam, fabric, leather and other lightweight materials to rigid plastic, metal, concrete, masonry, plaster, cardboard, ceramics, glass and wood based substrates. Product has fast flash off, high tack and long open time properties.

  • Usage Instructions

    Surface preparation: Bonding – the surface should be clean, dry, smooth, free of grease, mechanical damage and other particles that reduce adhesion.

    Priming – no special requirements.

    Shake the product well before use (for at least 30 sec).

    Bonding can be done from 0 °C to +35 °C, priming can be done from -5 °C to +35 °C, but the recommended application and product temperature should be in range from +15 °C to +27 °C. If not complying recommended temperatures, the drying times and adhesion properties deteriorates.

    For permanent adhesion apply the product on both surfaces in an equal layer, allow to dry 3 minutes and press both sides together.

    For temporary adhesion apply the product on one surface in an equal layer, allow to dry 3 minutes and press both sides together.

    On porous surfaces apply several layers.

    Spraying distance is about 20 cm. from the surface.

  • Logistical Information

    Product is packaged in 500 ml. cans.

    Store up to 18 months from the production date indicated in original sealed packaging at +10 °C to +50 °C.

    Protect from frost and direct sunlight. Do not store directly on concrete floor.

    Transport at a temperature of not less than +10 °C

  • Technical Specification

    Indicator Value Units
    Viscosity 550–600 CPS
    Solid content 30 %
    Yeald (500 ml) 1,5 m²
    Colour Clear –
    Temperature resistance -30 … +85 °C
    Flash off 1–2 min.
    Open time 60 min.
    Recommended application and product temperature +15 … +27 °C
    Bonding temperature 0 … +35 °C
    Priming temperature -5 … +35 °C
    Direction for use Double sided –
bottom of page