POINT 416 POLY FIX Polyester Base Chemical Anchor
(€9.67 Ex.VAT)
A two-component styrene-free polyester chemical anchor for medium loads, CE marked and ETA assessed, for use in a variety of materials such as concrete, solid and hollow bricks masonry.
- Quick setting and curing times
- Suitable for dry and wet concrete
- Can be used with standard caulking gun
- Overhead installation
POINT 416 POLY FIX is a bi-component polyester styrene free chemical anchor for medium loads, CE marked and ETA assessed for use in different base materials as concrete, solid masonry and hollow bricks masonry.
It is certified for threaded rods to be used in non-cracked concrete from diameters M8 to M24, in solid masonry from diameters M8 to M16 and hollow masonry from diameters M8 to M12, also for rebars Ø8 mm to Ø12 mm to be used in solid masonry.
Due to its strong adhesion and ease of penetration into holes and hollow materials, the resin allows a secure attachment without expansion and without stresses in the base material, which allows you to make fixings close to the corners and edges of base material.
ETA (European Technical Assessments) updated according to the Construction Product Regulation 305/2011. ETA-15/0560: Assessment for uncracked concrete, Option 7, according to ETAG-001 for diameters from M8 to M16. The product is certified for fixing with variable anchorage depths. This means that the project engineer and the user have an high flexibility. Maximum embedment depth up to 20 times nominal threaded rod diameter. Loads for installation in dry and wet concrete. Certified service temperatures are in the ranges: -40°C/+50°C (T° max long period = 40°C). ETA-11/0396: Assessment for masonry according to ETAG 029 for fixings in solid bricks, perforated bricks and hollow bricks. Utilization possible even on masonry with temporary humidity present only during the product installation phase. The product is homologated for being used with a wide range of masonry (6 type of bricks), threaded rods (from M8 to M12) and sleeves (GC 12×80 – GC 15×85 – GC 20×85). Certified service temperatures are in the ranges -40°C/+40°C (T° max long period = +24°C) and -40°C/+50°C (T° max long period = +40°C). Base material temperature (concrete, bricks, etc…) for installation between 0° and +30°C. VOC according to the French Decree 2011-321 and according to the standard ISO 16000/EN 16516.